vertical type Polymer PTFE Tube Ram Extruder Machine PFG500 Dia 300mm-500mm
PFG500 Single Screw Extruder Features:
ü Save time and money.
ü PLC design and easy to operate.
ü Long time span. No heating effect during operation.
ü With latest technology and optimized design.
ü Min - Max Dia:300-600mm.
ü Production Per Hour: 9-18kg/h.
ü Unlimited Length
ü Automatic operation.
Product Description- RAM Extruder For PTFE Tube(Φ300-600mm)
Sunkoo PFG500 Tube Extruder is to extrude PTFE/UHMWPE Tubes. It is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other machines. Low maintenance is required , giving high production in market.
PFG500 Single Screw Extruder Features Include:
1.Vertical Ram Extruder for PTFE Tubes
2.Ram extruding machine for PTFE Tubes.
3.Using for Pre-sintering PTFE material.
4.Suit for new PTFE material or Recycle PTFE material.
5. Adjustable Heating zone: 5 zone area
6. Long service life through solid workmanship and use of high quality components.
7. Measurement transducer like pressure, force and ram speed for permanent control of the extrusion process and extrusion speed.
8. Measuring and controlling system for constant extruder speed
9. Low space requirement through vertical construction
10.Operating through touch screen and recording of the extrusion process parameters
1. Save time and money, good advantage price offer to customers.
2. Intelligent and easy-to-use operations.
3. Small workplace required due to its compact design and electricity saving machine.
4. Super quality output and the physical properties is adjustable.
5. Precise temperature control, reaches + -1 degree.
6. Long- life, with modern technology and optimized design.
Q&A for Vertical Type Tube Ram Extruder
· Which is the maximum extrusion capacity in sintered liner in meter per hour?
A: Can change pressure time, each extrusion length and temperature to adjust the speed depend on size and wall thickness. about 1500 to 2500mm per hour.
· Which is the maximum vertical dimension of the machine including the 7m of finished liner before cutting off?
A: Machine net high is 2750mm. Consider about 1000mm higher space for mold change over with small crane on top. Machine install in second floor. ground floor for extruded tube.
· Which is the maximum length of liner that can be extruded?
A: Continue extrusion, no limited for length. For quite bigger size too heavy, need protection.
|Type||Tube compression moulding press|
|Plastic Processed||Sintered PTFE Powder|
|Machine with PTFE Tube Mould||Mould Depends on Required|
|Process||Verticle Press Moulding M/c|
|Tube OD Size range||310-500 mm|
|Tube THK Size range||5 - 35 mm|
|Tolerance THK||0.1 - 0.3 mm|
|Length||>OD 400mm advice 2M Length|
|Production Per Hour in Kg||10+|
|Electricity Consumption Per hour||20|
|Compressive force [kN]||2500-4000|
|Weight of the Machine||3600|
|High of the Machine mm||3450|
|Floor area of the Machine M2||5.8|
|Warrenty for Parts||1 Year|
|Machine Gurantee Period||1 Year|
|Free Spares||1 sets|
|Install Hole Dia mm||1000mm|
|Frame inside size L*W||1100*1100mm|
|Frame Outside size L*W||1400*1400mm|
|Voltage/PH/Hz||AC380V 50Hz 3 Phase|
Write a reviewYour Name:
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: