Extruder Machine Polymer PTFE Rod Ram PFB80 Dia 25mm-80mm
PTFE Plastic Rod Extruder 102
PFB80 Rod Extruder Features:Save time and money;Intelligent and easy-to-use,;Automatic;Computerized;Rod Dia Range Min - Max Dia:20-80 mm;Production Per Hour in Kg:7-10+;Long- life, with modern technology and optimizeddesign.
PFB150 Rod Extruder Features:
ü Save time and money.
ü PLC design and easy to operate.
ü Long time span. No heating effect during operation.
ü With latest technology and optimized design.
ü Min - Max Dia:25-80mm.
ü Production Per Hour: 7-12+ kg/h.
ü Automatic operation.
Sunkoo PFB80 Rod Extruder(Teflon PTFE Rod extrusion) is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other machines. Low maintenance is required , giving high production in market.
RAM Extruder For PTFE Rod(Φ25-80mm) application:
1.Horizontal Ram Extruder for PTFE rod
2.Ram extruding machine for PTFE rod
3.Using for Pre-sintering PTFE material.
4.Suit for new PTFE material or Recycle PTFE material.
PFB80 Rod Extruder Features Include:
1. Save time and money, good advantage price offer to customers.
2. Intelligent and easy-to-use operations.
3. Small workplace required due to its compact design and electricity saving machine.
4. Super quality output and the physical properties is adjustable.
5. Precise temperature control, reaches + -1 degree.
6. Long- life, with modern technology and optimized design.
The Extrusion Process of PFB80 Rod Extruder:
Ram extrusion is a process enabling the continuous production and processing of PTFE (Polytetrafluoroethylene). The basic material is PTFE powder. The powder is fed into a cylindrical extrusion pipe, compressed by means of a ram and at the same time, transported through the pipe, which is heated up to sintering temperature.
|Type||PTFE Horizontal Type Ram Extruder|
|Rod Dia Range Min - Max Dia||20-80 mm|
|Plastic Processed||Sintered PTFE Powder, UHMWPE, Polyethylene|
|Machine with PTFE Rod Mould||Mould Depends on Required|
|Process||Ram Extrucer M/c|
|Power KW (Main Motor+ heating)||24|
|Tolerance mm||0.5-2mm +|
|Production Per Hour in Kg||7-10+|
|Compressive force [kN]||100 -500|
|Electricity Consumption Per hour||2.5|
|Weight of the Machine||960|
|High of the Machine mm||1560|
|Voltage/PH/Hz||AC380V 50Hz 3 Phase|
|Floor area of the Machine M2||1.2|
Write a reviewYour Name:
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: