Teflon PTFE Rod Bar Single Screw Extruder PFMY600 Dia 20mm-500mm

Category: PTFE Plastic Rod Extruder
Product Code: PTFE Plastic Rod Extruder 104
Availability:In Stock

FMY-600 Plastic Rod Extruder Features:Save time and money;Intelligent and easy-to-use;Long- life, with modern technology and optimized design;PTFE Teflon Rod Range Dia:300mm-600mm;Production Per Hour in Kg: 12 - 20;Automatic;Computerized;


Description

Teflon PTFE Rod Bar Single Screw Extruder Machine

Product Description:

The PFMY600 rod ram extruder series from Sunkoo is able to extrude rod which dia from 300mm to 600mm.The control system is automatic computerized and has a control panel to programming of all necessary parameters.The extruder is prepared for tools for:

• Single rods

• Multiple rods

FMY-600 Rod Extruder Features Include:

1.Save time and money.

2.Intelligent and easy-to-use,

3.Small workplace foot extruder requiring less space and electricity.

4.Stable quality and the physical properties is adjustable.

5.Precise temperature control,reaches + -1 degree.

6.Long- life, with modern technology and optimized design.

Machine's Features:

1.Horizontal Ram Extruder for PTFE rod

2.Ram extruding machine for PTFE extruded rod

3.Using for Pre-sintering PTFE material.

4.Suit for new PTFE material or Recycle PTFE material.

The ergonomics and the extremely user-friendly operation represent a new standard which are not previously encountered in conventional designs.The PFMY600 Series allow users to operate the ram extruder after a very short training phase.Due to the low energy consumption, silent operation and integrated quick and easy extrusion system,the PFMY600 series extruders are ideal for factory and office environments, requiring less space and electricity.

Tech Specs:

Type PTFE Moulding Press
Screw Hydraulic Press
Automatic Automatic
Computerized Computerized
Plastic Processed Sintered PTFE Powder
PTFE Teflon Rod Range Dia 300mm-600mm
Machine with PTFE Rod Mould Mould Depends on Required
Process Verticle Press Moulding M/c
Power KW 20
Tolerance mm Depends
Length mm 300mm
Production Per Hour in Kg 12 - 20
Electricity Consumption Per hour 32
Temperature zone 12-16
Compressive force [kN] 1500-3500
Weight of the Machine 8300
High of the Machine mm 1200
Voltage/PH/Hz AC380V 50Hz 3 Phase
Floor area of the Machine M2 14

Reviews (1)

Write a review

Your Name:
Your Review:
Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: