Gabatarwar Suko Ptfe (Uhmwpe) Ram Rod Extruder

PTFE (polytetrafluoroethy) an fi sani da PTFE, Teflon da King Plastic.Teflon extruder na'ura ce da ta ƙware wajen fitar da samfuran PTFE (UHMWPE).Ta hanyar jerin matakai irin su extrusion, dumama, da sanyaya, ana sarrafa albarkatun PTFE foda da aka riga aka yi da shi ta hanyar ram sanda extruder don samarwa.Farashin PTFEsamfuran da suka dace da ƙayyadaddun bayanai daban-daban.Abubuwan da suka shafi abubuwan da suka danganci amfani da su, ƙayyadaddun bayanai, kayan aiki, buƙatun mai amfani, da dai sauransu, Suko na iya tsarawa da samar da injunan sandar PTFE na ƙayyadaddun bayanai daban-daban.The polytetrafluoroethylene ( matsananci high kwayoyin nauyi polyethylene) kayayyakin samar da ram sanda extruder ana amfani da ko'ina a cikin sinadaran, likita, aerospace, inji sarrafa, zafi musayar da sauran filayen.

 

Suko tare da shekaru masu yawa na bincike da ƙwarewar haɓakawa a fagen kayan aikin PTFE, ƙwarewa a cikin bincike, haɓakawa, samarwa da siyar da kayan aikin PTFE.Kayan aikinmu sun yi hidima ga ƙasashe da yankuna kusan arba'in a kasuwannin duniya.Abokan cinikinmu sun fito ne daga masana'antar likitanci, masana'antar sararin samaniya, masana'antar soja, masana'antar sinadarai, masana'antar kera motoci da masana'antar bututu daban-daban, kuma masana'antar fluoroplastic ta duniya ta san Suko sosai.

Darajar kamfani:Ƙirƙira, Fasaha, Ƙwarewa da basira.

Manufar kamfani:Don ƙirƙirar kayan aikin PTFE na farko a duniya.Suko ya cancanci amanar ku.

 

1. HALAYEN PTFE (UHMWPE) RAM sandar EXTRUDER

1. Ta hanyar ci gaba da ci gaba, kayan aiki sun fi wayo, mafi kwanciyar hankali da inganci.
2. Ana sarrafa kayan aikin ta tsarin PLC, kuma ana sarrafa ta ta atomatik tare da aiki mai sauƙi.
3. Tare da ƙira iri-iri, kayan aiki na iya saduwa da buƙatun masu amfani daban-daban, kuma a keɓance su ga abokan ciniki.
4. Kayan aiki yana gudana a tsaye na dogon lokaci, tare da ƙananan ƙara.Kuma yana rage farashi ta hanyar adana ƙarfi da kuzari yayin kula da matsa lamba.
5. Ana yin kayan aiki da gyare-gyare ta hanyar fasaha ta musamman, juriya na lalata, mai dorewa kuma tare da tsawon rayuwar sabis.
6. Tsarin kayan aiki yana da sauƙi kuma yana ɗaukar sarari kaɗan.
7. Kayayyakin da aka fitar suna da kyakkyawan aiki cikin sharuddan yawa da ƙarfi.
8. An sanye shi da tsarin ciyarwa ta atomatik, cike guga na kilogiram 50-80, tsarin ciyarwa ta atomatik zai iya ba da garantin sa'o'i 4-8 na aiki kuma yana adana farashin aiki da yawa.
9. Farashin PTFEna iya ci gaba da tura sanda kuma ana iya yanke sanda bisa ga bukatun.
10. Samar da cikakken tsarin ƙira, wanda ya haɗa da cikakken saiti na kayan haɗi masu dacewa, tsarin dumama da sintering, tsarin sanyaya, mai sarrafa zafin jiki, sashi, da dai sauransu.

2. KAYAN AIKI DOMIN MULKI

1. Ana buƙatar ƙasan rukunin yanar gizon don zama daidai, kuma nauyin rukunin yanar gizon bai ƙasa da buƙatun ƙira ba.
2. Dandalin aiki yana buƙatar sarari mai tsabta don rage ƙura.Zai fi kyau a sami bututun samun iska a cikin bitar don sauƙaƙe samun iska.
3. Ma'aunin wutar lantarki na masana'antu 380V 50Hz 3P, ana iya daidaita wutar lantarki gwargwadon bukatun mai amfani.
4. Masana'antar na dauke da katunan rarraba wutar lantarki, damtse iska da sauran kayan tallafi.
5. Ana buƙatar kayan aiki tare da tsarin sanyaya.Ana iya amfani da guga / tankunan ruwa guda biyu tare da famfo mai sanyaya don sake sarrafa albarkatun ruwa.
6. Yanayin zafin jiki na shuka bai kamata ya wuce 28 ° C ba.
7. Thea tsaye PTFE sanda extrusion injiextrudes daga sama zuwa kasa.An shigar da kayan aiki a kan dandamali ko bene tare da tsawo na sararin samaniya na kimanin mita 2.8.Dole ne a yi la'akari da nisa mai tasiri a cikin madaidaiciyar shugabanci na na'urar, kuma dole ne a tabbatar da isasshen tsayi a ƙarƙashin ƙayyadadden ramin madauwari na na'urar don saduwa da buƙatun tsawon sandar PTFE mai extruded.
8. Horizontal PTFE sanda extrusion injiyana buƙatar la'akari da nisa mai tasiri a cikin jagorar kwance na kayan aiki, kuma wajibi ne don tabbatar da tsawon sandar PTFE.Kayan aiki sun haɗa da tsawon mold na mita 4-7 (ban da tsawon sandar da aka gama da shi), nisa na mita 1.2, tsayin mita 1.8.

3. KAYAN KAYA

Samfurin Inji	Saukewa: PFLB20	Saukewa: PFB80	Saukewa: PFB150
Tsari	Fitowar Tsaye	Fitar Hankali
Wutar lantarki KW (Motar Lantarki)	14	24	33
Range Dia(mm)	4-20	25-80	80-150 (200)
Tsawon Tsawon Sanda	Ci gaba da extrude tare da tsayi mara iyaka
Mai sarrafawa	PLC+ Touch Screen	PLC+ Touch Screen	PLC+ Touch Screen
Fitowa (Kg/h)	7+	8+	10+
Wutar lantarki / PH/Hz	380V 50Hz 3P	380V 50Hz 3P	380V 50Hz 3P
Amfanin Wutar Lantarki (KW/h)	2+	2.5+	3+
Yankin zafin jiki	3-4	4-8	8-12
Nauyin Inji (Kg)	930	960	1220
Tsayin Inji (mm)	2150	1800	1900
Wurin bene na inji (m2)	3.5	7	10
Mold	Girman mold an tsara shi bisa ga ƙayyadaddun abokin ciniki.Cikakken saitin ƙirar ya haɗa da jikin mold, shugaban extrusion, flange haɗin haɗi, cikakken saiti na zoben dumama zafi mai zafi, cikakken saitin na'urori masu auna firikwensin, tsarin jaket na ruwa mai sanyaya, da layin haɗin zafi mai zafi, mold da tallafin samfur. Ƙarshen saman ana kula da shi musamman don zama santsi, mai ɗorewa, da juriya na lalata.Kauri daga cikin auduga mai rufi ya fi 5mm, kuma kauri mai dumama ya fi 10mm.

 

4. KYAUTATA KAYAN KYAUTA DA KUMA TSARI

5. TSARIN AIKIN KAYAN

1. Bincika ko na'urar wutar lantarki da wutar lantarki ta daidaita, kuma haɗin layin ya dace da zane na wayoyi.
2. Bincika matsayin man hydraulic kuma duba ko an haɗa layin hydraulic daidai.Tabbatar da haɗin ruwan sanyaya da haɗin iska da aka matsa
3. Bincika ko an shigar da ƙirar daidai.Gudu kuma yi gyara da hannu don tabbatarwa.
4. Kunna wutar lantarki kuma saita sigogi kamar matsa lamba, zafin jiki na kowane yankin zafin jiki, lokacin riƙewa, da saitin ciyarwa ta atomatik ta tsarin PLC.
5. Ƙara foda da aka riga aka shirya a cikin hopper ko ganga (da hannu ko ta atomatik).
6. Fara injin.
7. Yanke sandar PTFE extruded zuwa tsayin da ake buƙata.
8. Kashe na'ura kuma tsaftace tsararren bayan amfani.

6. KAYAN KYAUTATA DA KWALLIYA

1. A kai a kai duba tsayi, tsabta da zafin jiki na man hydraulic.
2. Ana bada shawara don maye gurbin man fetur na hydraulic kowane watanni shida.
3. Maye gurbin sawa hatimai akan lokaci.
4. Ya kamata a tsaftace tsafta da kiyayewa a cikin lokaci, kuma ya kamata a rufe saman da man fetur mai karewa.
5. Yi a hankali sarrafa firikwensin zafin zafin na'urar dumama, kuma adana shi da kyau.

7. KAYAN KYAUTA DA BAYANIN SAUKI

1. Kayan aikin sun ƙunshi babban injin, tashar ruwa, ma'ajiyar sarrafawa, mai ba da abinci ta atomatik, masu riƙewa, ramukan dumama, ƙira da sauran kayan haɗi.Ana aika kayan haɗi masu mahimmanci ga abokan ciniki tare da kayan aiki.
2. Ana aika jerin kayan haɗi masu mahimmanci don kayan aiki zuwa mai amfani tare da kayan aiki.
3. Lokacin da mai amfani ya sayi kayan aikin kamfaninmu, ban da na'urorin haɗi masu mahimmanci, za mu samar da abubuwan da suka dace ga mai amfani don maye gurbin da gyara kayan aiki.Abubuwan da aka gyara sune daidaitattun sassa kuma ana iya siyan su a cikin kasuwar gida.

8. JAGORA

1. Saboda fasaha na musamman na kayan aiki, abokan ciniki za su iya zuwa masana'anta don koyo game da shigarwa, ƙaddamarwa, aiki, canjin mold, kiyayewa, tsarin jagorancin kayan aiki kyauta kafin bayarwa.
2. Idan ba za ku iya zuwa kamfaninmu don yin karatu ba saboda rashin jin daɗi kamar nisa, ma'aikata, lokaci, za mu iya shirya injiniyoyi don su zo don jagorantar shigarwa, ƙaddamarwa, aiki, maye gurbin mold, kulawa, da aiwatar da jagorancin kayan aiki a ƙarƙashin. yarjejeniyar dayan bangaren.
3. Hakanan zamu iya gudanar da jagora mai nisa.Masu amfani za su iya zaɓar wasu hanyoyin kamar wayar tarho, bidiyo, imel, da sauransu don koyo game da shigarwa na kayan aiki, ƙaddamarwa, aiki, canjin ƙira, kiyayewa, jagorar tsari, da dai sauransu na kayan aiki.

9. BAYAN HIDIMAR SALLAH

1. Daga ranar da aka karɓi na'ura, lokacin garanti na duk na'urorin haɗi shine shekara guda.Muna ba da sabis na jagorar kulawa kyauta yayin lokacin garanti.
2. Idan akwai wata matsala tare da na'urorin haɗi a wajen lokacin garanti, da fatan za a tuntuɓe mu cikin lokaci don bayyana matsalar, kuma za mu samar da ƙudurin biyo baya a cikin sa'o'i 24.
3. Idan muna da mai rabawa na gida, za mu iya tuntuɓar mai rabawa na gida don haɗin kai.
4. Duk tambayoyi game da kayan aiki za a iya tuntuɓar mu ta wasiƙa, bidiyo, tarho, da sauransu.

10. PTFE ROD LINE KYAUTA CIYARWA

Vacuum atomatik ciyar, ciki har da matsa iska reverse hurawa tsarin, fara ciyar da tsarin, wanka tiyo, tsotsa gun, injin janareta, PCB mai kula, da 30-300 kg / h, diamita 150mm da tsawo 600mm, saita atomatik ciyar lokaci da fitarwa lokaci, foda. kwarara yana da iko, duk samar da bakin karfe, iko mai hankali.

Ganga mai haɗewa shine 600mm a diamita da tsayi 700mm, tare da injin rage 2.2kw, saurin motsawa na 15-25 juya / min, farantin ƙasa mai kauri 8-10mm, da ƙarfin ciyarwa na 75-90kg.

SKVQC-10 JERIN GIRMA:

Suna		A'a.	Alamar / Mai ƙira
Vacuum janareta		1pcs	China
316L bakin karfe tace		4pcs	China
Bakin karfe 304 (bakin karfe)		1 saiti	Suko
Matsewar iska baya tsarin busawa	Bawul ɗin baya	1 saiti	New Zealand
	Bangaren huhu		Kamfanin AirTAC
Tsarin zubar da iska		1 saiti	China
Tsarin sarrafawa	PC allo	1 saiti	Suko
	Canja wutar lantarki	1pcs	China
	Solenoid bawul	1pcs	Kamfanin AirTAC
Suction tiyo(Φ25)abinci-sakin karfe waya ƙarfafa tiyo		3M	Jamus
Bakin karfe tsotsa bututun ƙarfe (Φ25)		1pcs	L 350mm
Bakin karfe ganga		1pcs	OD600mm; H700mm
Gear Motor		1pcs	1.5KW 15-20r/m

FASAHA NA FASAHA:

Samfura	Matsewar iska	Matsin iska
Saukewa: SKVQC-10	180L/min	0.4-0.6MPa

11. KAYAN ZABI masu dangantaka

 

Suna	Takaitaccen Bayani
PTFE foda pre-sintering makera	Ƙaddamar da ikon PTFE
Farashin PTFE	Fasa dunƙule cikin ƙarfi
Electric sieve foda inji	Don kwance foda kafin hadawa
Layin samar da kayan da aka sake yin fa'ida	Dicer, injin wanki, crusher
Foda Mixer / Foda & Auxiliary Mixer	Don haɗa foda tare da mai mai mai ruwa
Na'urar yankan sandar hydraulic	Yanke manyan sanduna masu girma kamar yadda ake buƙata