SUKO-1

PTFE Rod

Hello, come to consult our products !
  • PTFE Rod Dia 50mm (1.96”)

    PTFE Rod Dia 50mm (1.96”)

    PTFE rod is generally used as machining stock for all kinds of chemical, electrical and mechanical components where the outstanding performance characteristics of PTFE are required. Various fillers are available to modify the properties of PTFE to meet application requirements.  Specification: OD 50mm material:100% PTFE virgin moulded rod quality: white,smooth,no air hole Special gravity : 2.10 ~ 2.30 Tensile strength: 20.0 MPa Ultimate elongation: 150% aging resistance radiation r...
  • Extruded PTFE Rod OD 4mm – 200mm

    Extruded PTFE Rod OD 4mm – 200mm

    Extruded PTFE Rod is manufactured by techniques of paste extruding and RAM extruding method in the diameter from 5 to 110mm with PTFE granular resin. As PTFE (polymer) has a very low co-efficient of friction, the surface of extruded PTFE rod has similar friction levels to ice. Extruded PTFE rod can work at -180° C ~+260° C and is the best electrical insulator of all known plastics.  PTFE rod can be used as lining, seal components, wire insulation, slide block, gasket, seal, and dielectri...
  • Molded PTFE Rod Thick 6mm – 660mm

    Molded PTFE Rod Thick 6mm – 660mm

    Molded PTFE rod is generally used as machining stock for all kinds of chemical, electrical and mechanical components where the outstanding performance characteristics of PTFE are required. Various fillers are available to modify the properties of PTFE to meet application requirements. Fluoro-Plastics compression molds rods and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available.  Mol...
  • Natural White 2"  PTFE Rod

    Natural White 2" PTFE Rod

    * Material: PTFE polymer * Shape: Rod * Diameter: 2″ or Custom * Length: Custom * Finish: Smooth Polymer PTFE fluoroplastic family offers high chemical resistance, low and high temperature capability, resistance to weathering, low friction, electrical and thermal insulation. PTFE’s mechanical properties are low compared to other plastics, but its properties remain at a useful level over a wide temperature range of -100°F to +400°F (-73°C to 204°C). Mechanical properties are ofte...
  • OD 10mm PTFE Round Rod Bar

    OD 10mm PTFE Round Rod Bar

    PTFE rod is generally used as machining stock for all kinds of chemical, electrical and mechanical components where the outstanding performance characteristics of PTFE are required. Various fillers are available to modify the properties of PTFE to meet application requirements.  Specification: OD 10mm material:100% PTFE virgin moulded rod quality: white,smooth,no air hole Special gravity : 2.10 ~ 2.30 Tensile strength: 20.0 MPa Ultimate elongation: 150% aging resistance radiation resist...
  • Polymer- PTFE Virgin Plastic Rod 15mm

    Polymer- PTFE Virgin Plastic Rod 15mm

    Specification: Diameter:8mm material:100% PTFE virgin moulded rod quality: white,smooth,no air hole Special gravity : 2.10 ~ 2.30 Tensile strength: 20.0 MPa Ultimate elongation: 150% aging resistance radiation resistance low permeability high press resistance anti-corrosion,anti-volatilization lubricative Other sizes: Φ70mm Φ65mm Φ60mm Φ55mm Φ50mm Φ45mm Φ40mm Φ35mm Φ30mm Φ25mm Φ20mm Φ18mm Φ16mm Φ15mm Φ14mm Φ13mm Φ12mm Φ10mm Φ9mm Φ8mm Φ7mm Φ6mm Φ5mm Application: It is used as electric ins...
123 Next > >> Page 1 / 3