100% Original PTFE Manufacturers - Molded PTFE Rod Thick 6mm – 660mm – SuKo
100% Original PTFE Manufacturers - Molded PTFE Rod Thick 6mm – 660mm – SuKo Detail:
Molded PTFE rod is generally used as machining stock for all kinds of chemical, electrical and mechanical components where the outstanding performance characteristics of PTFE are required. Various fillers are available to modify the properties of PTFE to meet application requirements.
Fluoro-Plastics compression molds rods and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available. Molded rods are preferred for machining because compression molding yields greater material homogeneity for the finished part.
All rods can be etched for bonding, and can be mounted on a plywood disk for less waste in machining.
All rods can be made with filled (reinforced) PTFE to enhance the performance parameters of PTFE. Materials available for reinforcement are Glass Fiber, Carbon, Graphite, Bronze, Molybdenum Disulfide, and Stainless Steel.
Specification:(mm)
| 6*100 | 48*300 | 140*300 | 380*200 |
| 8*100 | 50*300 | 150*300 | 408*300 |
| 10*100 | 52*300 | 160*300 | 453*200 |
| 12*100 | 55*300 | 165*300 | 516.5*120 |
| 13*100 | 60*300 | 170*300 | 565*200 |
| 14*150 | 65*300 | 180*300 | 610*200 |
| 15*150 | 68*300 | 190*300 | 660*120 |
| 16*150 | 70*300 | 200*360 | 100*1000 |
| 18*150 | 75*300 | 210*250 | 110*1000 |
| 20*300 | 80*300 | 220*300 | 120*1000 |
| 22*120 | 85*300 | 230*200 | 130*1000 |
| 24.5*140 | 90*300 | 240*250 | 140*1000 |
| 25*300 | 95*300 | 250*300 | 150*1000 |
| 27*150 | 100*300 | 262*200 | 160*1000 |
| 28*120 | 108*200 | 270*150 | 170*1000 |
| 30*300 | 110*300 | 280*300 | 180*1000 |
| 32*150 | 120*300 | 315*400 | 200*1000 |
| 35*300 | 125*300 | 336*300 | 250*1000 |
| 40*300 | 130*300 | 347*200 | 300*1000 |
| 45*300 | 134*200 | 360*300 |
Product detail pictures:
Related Product Guide:
We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for 100% Original PTFE Manufacturers - Molded PTFE Rod Thick 6mm – 660mm – SuKo , The product will supply to all over the world, such as: Las Vegas, Cambodia, Iran, Company name, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by ISO quality management standard strictly, creating top-ranking company by spirit of progress-marking honesty and optimism.
By Fanny from Leicester - 2018.09.23 17:37
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Stephanie from Luxemburg - 2018.11.04 10:32