Ana iya sarrafa wannan filastik injiniya zuwa kusan kowane abu, daga ƙananan kaya (ƙananan kaya) da bearings zuwa manyan sifofi waɗanda har kwanan nan ba su yiwuwa da ƙarfe kawai.Ba wai kawai ya fi ƙarfin ƙarfe a aikace-aikacen abrasion ba, yana da sauƙin yin na'ura kuma don haka mai rahusa.Ana iya niƙa wannan robobi mai ɗumbin yawa, a ɗaura shi, da zaƙi, da hakowa, da kuma juya shi don ƙirƙirar sassa iri-iri a kan farashi mai gasa.Yana da juriya na abrasion na ban mamaki, juriya mafi girman tasiri, rashin tsayawa da mai mai da kai da kyawawan kaddarorin inji, har ma a cikin yanayin cryogenic.
Amfanin UHMWPE Rod
UHMWPE ba shi da wari, mara ɗanɗano, kuma mara guba, Yana da ƙarancin ɗanɗano mai ƙarancin ɗanɗano mai ƙarancin ƙima mai ƙima da kai kuma yana da juriya ga abrasion.Juriya sosai ga ruwa, danshi, yawancin sinadarai masu jurewa radiation UV, da ƙananan ƙwayoyin cuta.UHMWPE kawai yakan zama tsinke a yanayin zafi ƙasa -150 °C.
Ta yaya UHMWPE Rod ke yin aiki?
UHMWPEyana da juriya mai ban mamaki ga abrasion kuma yana iya wuce kusan kowane filastik injiniya a wannan batun.Yana da ƙarancin juzu'in haɗin kai kuma yana ba da matsakaicin matsakaici wanda ke da kyauta sosai kuma yana daɗewa na musamman.Yana da juriya ga yawancin acid dilute, kaushi da abubuwan tsaftacewa.Yana da max zafin aiki na da 90 ° C da kuma ɗan gajeren lokaci zafin aiki na da 120 ° C.Wani abu mai tauri, tare da mafi girman ƙarfin tasiri na kowane thermoplastic da aka yi a yanzu.
Me ake amfani da UHMWPE Rod don?Saboda sandan UHMWPE yana da kyakkyawan juriya na abrasion ana amfani dashi sau da yawa don yashi, tsakuwa ko aikace-aikacen aiwatar da tara.Waɗannan mahallin suna da tsananin tsauri akan kowane abu mai ɗaukar nauyi amma UHMWPE ɗaya ne daga cikin ƴan robobin injiniya waɗanda ke da ikon jure irin wannan azabtarwa.
Hakanan za'a iya amfani da sandar UHMWPE don ƙananan juzu'in juzu'i saboda ƙarancin haɗin gwiwa yana ba da matsakaicin matsakaici wanda ke da kyauta sosai kuma mai dorewa na musamman.Sau da yawa ana samun shi a wuraren samar da abinci inda manyan ɗimbin kwantena ke buƙatar jagora tare da masu jigilar kayayyaki ko layukan samarwa.Saboda yana da ƙarancin shayar da ɗanshi, ana kuma samun shi a wasu wuraren da ake buƙata na aikace-aikacen ruwa.A wasu lokuta ana amfani da shi a cikin wasu abubuwan da aka gyara na cryogenic saboda ƙarancin yanayin zafin sa.
Saboda juriyar sawa da tasiri, UHMWPE yana ci gaba da samun karuwar aikace-aikacen masana'antu, gami da sassan kera motoci da kwalba.Tun daga 1960s, shi ma ya kasance abu mafi yawan amfani da shi don jimlar arthroplasty na haɗin gwiwa a cikin kashin baya da na kashin baya.
Menene halayen machining na UHMWPE Rod?Ana ba da shawarar kayan aikin ƙarfe mai ƙarfi tare da rake mai yawa na baya, rake na gefe da sharewa, da radius mai karimci.Yi taka tsantsan lokacin juya UHMWPE yayin da kwakwalwan kwamfuta za su ci gaba da kasancewa suna nannade kayan aikin don haka ana ba da shawarar "matakin pecking".
Manne da bondingUHMWPE baya sha ruwa da sauri, kuma ba ya jika cikin sauƙi, wanda ke sa haɗa shi da sauran polymers mai wahala.
Shin sandan UHMWPE yana da kyau don aikace-aikacen abinci?Matsayin dabi'a UHMWPE shine FDA ta amince don amfani dashi a aikace-aikacen abinci.
Shin UHMWPE Rod yana da kyakkyawan juriya na Wear?UHMWPE sanda yana da matukar juriya ga abrasion, a wasu nau'ikan kasancewa 15 sau 15 juriya ga abrasion fiye da carbon karfe.
Juriya na sinadarai Yana da matuƙar juriya ga sinadarai masu lalata sai dai oxidizing acid
Halayen musamman Ƙimar jujjuyawa tana da matukar ƙasa da ta nailan da acetal, kuma tana kama da na PTFE, ko polymer.Fatar ba ta yin mu'amala da ita sosai, tana sa fuskar ta ji slim, kusan gyambo.
Me yasa zaka zabi sandar UHMWPE?Wannan filastik injiniya yana da ƙarancin ƙarancin juzu'i wanda ke ba da kyawawan kaddarorin zamewa kuma yana ɗaya daga cikin mafi kyawun kayan don lalacewa da juriya.Yana da tauri ko da a ƙananan zafin jiki, yana ba da ƙarancin nauyi, kuma yana da sauƙin walda.
Lokacin aikawa: Mayu-24-2017