English
SUKO-1

Hordhaca PTFE Ram Tube Extruder

PTFE Ram tube extruder waxaa si gaar ah loogu talagalay soo saarista PTFE (Teflon) ama ultra highmolecular (UHMWPE) tuubooyinka.

1. PTFE Tube Ram Extruder

PTFE Ram tube extruder waxaa si gaar ah loogu talagalay soo saarista PTFE (Teflon) amaUHMWPEtuubo.Marka loo eego cabbirka tuubada loo baahan yahay, naqshadeynta mashiinka ayaa sidoo kale ka duwan, iyadoo la adeegsanayo qaabab kala duwan.

 

2. Mabda'a Shaqada ee Mashiinka

Budada PTFE waxaa lagu daraa foosto quudinta, budada ayaa go'an oo qaabaysan cadaadiska cadaadiska haydarooliga, ka dibna kuleyl iyada oo loo marayo qolka kuleylka wakhti go'an, xoqin iyo qaabeynta, iyo ugu dambeyntii tuubada loo baahan yahay ayaa soo baxda, tuubada waxay noqon kartaa mid aan xad lahayn, isticmaaluhu wuxuu gooyn karaa dhererka loo baahan yahay.

 

3. Moodooyinka Mashiinka iyo Xaashiyaha Xogta
Qaabka Mashiinka PFG150 PFG300 PFG500
Habka

Tooska Ram Extruder M/c
Awood KW (matoorka korontada) 15kw 22kw 72kw
Cabbirka Range OD 20-150mm 150-300mm 300-500mm
Dulqaadka THK 0.1-0.2mm 0.1-0.2mm 0.1-0.2mm
Dulqaadka OD 0.1-0.5mm 0.5-2mm 3mm
Dhererka Tuubbada Bannaanka ah

Ku sii wad extrude dherer aan xadidnayn
Wax soo saarka saacadii KG 8+ 10+ 13+
Voltage/ PH/Hz 380V 50Hz 3P 380V 50Hz 3P 380V 50Hz 3P
  • Waqti badbaadi, hal qof ayaa ku shaqayn kara dhowr mashiin.
  • Inteligent PLC touch screen oo ay fududahay in la isticmaalo.
  • Goob yar oo shaqo ayaa loo baahan yahay iyadoo ay ugu wacan tahay nakhshaddeeda is haysta iyo mashiinka badbaadinta korontada.
  • Wax soo saarka tayada sare leh iyo sifooyinka jireed waa la hagaajin karo.
  • Xakamaynta heerkulka saxda ah, wuxuu gaaraa + -1 digrii.
  • Nolol dheer, oo leh tignoolajiyada casriga ah iyo naqshadaynta la hagaajiyay.
  • Ballaarinta sare, xoogga xajinta & cufisjiidad gaar ah.
  • Nidaamka Quudinta Tooska ah, oo ay ku jirto foosto birta ah.

 

4. Tilmaanta Rakibaadda
Qaabka Mashiinka Dhererka dabaqa hoose Dhererka mashiinka Meel ka badan mashiinka Dhexroorka daloolka
PFG150 3000-6000mm 2460mm 1000mm 300mm
PFG300 3000-6000mm 2879mm 1000mm 450mm
PFG500 3000-6000mm 3100mm 1000mm 650mm

 

5. Habka Hawlgelinta Mashiinka

  1. Hubi fiilooyinka, tuubooyinka iyo saliidda hawo-biyoodka.
  2. Ku rakib caaryada cabbirka loo baahan yahay.
  3. Isticmaal habka quudinta tooska ah ama quudinta gacanta, bilow shaqada gacanta mashiinka.
  4. Ku billow kululaynta adiga oo dejinaya qalooca kuleyliyaha iyada oo loo marayo guddiga PLC.
  5. Tuubada extrusion waxay dhexda u sii martaa qolka kuleylinta.
  6. Iska jar tuubada si aad u hesho dhererka aad rabto.
  7. Mashiinka waa la hakin karaa oo la xiri karaa iyada oo loo marayo guddiga xakamaynta PLC.

 

6. Dayactirka mishiinada iyo qaybaha dambe
  • Si joogto ah u hubi dhererka, nadaafadda iyo heerkulka saliidda hydraulic.
  • Nadiifi caaryada aan la isticmaalin oo mari saliid ka hortagga miridhku korka si aad u ilaaliso.
  • Dareemka heerkulka giraanta kuleylka waa in si sax ah loo rakibaa.
Waqtiga boostada: Nov-11-2018