PTFE Tube Ram Vertical Type Extruder PFG300 Dia 150mm-300mm

PTFE Tube Ram Vertical Type Extruder Machine

PTFE Tube Ram PFG300  Single Screw Extruder Features:

ü  Save time and money.

ü  PLC design and easy to operate.

ü  Long time span. No heating effect during operation.

ü  With latest technology and optimized design.

ü  Min - Max Dia:150-300mm.

ü  Production Per Hour:  10-15kg/h.

ü  Unlimited Length

ü  Automatic operation.

ü  5 Heating Zones

 

 

TEFLON PTFE ROD RAM EXTRUDER AUTOMATIC MACHINE

Product Description-  RAM Extruder For PTFE Tube(Φ150-300mm)

Sunkoo PFG300 Tube Extruder is to extrude PTFE/UHMWPE Tubes. It is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other machines. Low  maintenance is required , giving  high production  in market.

 

PFG150 Single Screw Extruder Features Include:

1.Vertical Ram Extruder for PTFE Tubes

2.Ram extruding machine for PTFE Tubes.

3.Using for Pre-sintering PTFE material.

4.Suit for new PTFE material or Recycle PTFE material.

5. Adjustable Heating zone: 5 zone area

6. Long service life through solid workmanship and use of high quality components.

7. Measurement transducer like pressure, force and ram speed for permanent control of the extrusion process and extrusion speed.

8. Measuring and controlling system for constant extruder speed

9. Low space requirement through vertical construction

10.Operating through touch screen and recording of the extrusion process parameters

 

 

Benefits:

1. Save time and money, good advantage price offer to customers.

2. Intelligent and easy-to-use operations.

3. Small workplace required due to its compact design and electricity saving machine.

4. Super quality output and the physical properties is adjustable.

5. Precise temperature control, reaches + -1 degree.

6. Long- life, with modern technology and optimized design.

 

Q&A for Vertical Type Tube Ram Extruder

· Which is the maximum extrusion capacity in sintered liner in meter per hour?

A: Can change pressure time, each extrusion length and temperature to adjust the speed depend on size and wall thickness. about 1500 to 2500mm per hour.

· Which is the maximum vertical dimension of the machine including the 7m of finished liner before cutting off?
A: Machine net high is 2750mm. Consider about 1000mm higher space for mold change over with small crane on top. Machine install in second floor. ground floor for extruded tube.

· Which is the maximum length of liner that can be extruded?
A: Continue extrusion, no limited for length. For quite bigger size too heavy, need protection.

 

 

Technical Data：

Type	Vertical type Ram Extruder
Screw	Single-Plunger
Automatic	Semi - Automatic
Computerized	Computerized
Plastic Processed	Sintered PTFE Powder
Machine with PTFE Tube Mould	Mould Depends on Required
Process	Ramming Extruder M/c
Power KW	25
Tube OD Size range	150-300 mm
Tube THK Size range	1.5 - 35 mm
Tolerance THK	0.1 - 0.2 mm
Tolerance OD	0.5mm-2mm
Length	Unlimited
Production Per Hour in Kg	10-15
Electricity Consumption Per hour Average	2
Temperature zone	6-8
Compressive force [kN]	500 - 1100
Weight of the Machine	1980
High of the Machine mm	2960
Floor area of the Machine M2	4.6
Warrenty for Parts	1 Year
Machine Gurantee Period	1 Year
Free Spares	1 sets
Floor Hole Dia mm	600mm
Frame inside size L*W	800*800mm
Frame Outside size L*W	1000*1000mm
Voltage/PH/Hz	AC380V 50Hz 3 Phase

 

Write a review

Your Name:
Your Review:
Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: